Please fill in the form on the right and we will get back to you as soon as possible with a quotation.
How to measure:
The measurement process is the same regardless of whether you order the Reveal or Front Facing Wall flood barrier.
We require, in millimetres, wall to wall measurements of the location you wish to install our product. The wall you wish to install the flood barrier on must be a flat surface, at a 90° angle to the ground. The ground must also be flat. If the ground is soft or is not flat, a cement overlay or steel U-shaped channel is recommended.
While the height of the flood barrier is your choice, an additional 300mm in height above the installation location is required to insert and remove the panels. For example, a 600mm high flood barrier requires a minimum 900mm high clear space for installation.
We require photos of the front and rear of the installation site.